Eureka NEW400 Series Vacuum Cleaner Manual

The Eureka NEW400 Series Vacuum Cleaner is designed for efficient cleaning with powerful suction and advanced filtration. It features a lightweight design, multiple attachments for various surfaces, and a bagless system for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Powerful motor, HEPA filtration, multiple attachments, and a lightweight design for easy maneuverability.

Feature	Description
HEPA Filter	Traps allergens and dust for cleaner air.
Bagless Design	Easy to empty and maintain without bags.
Multiple Attachments	Includes crevice tool, dusting brush, and upholstery nozzle.
Lightweight	Easy to carry and maneuver around the house.
Powerful Suction	Efficiently cleans carpets and hard floors.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into AC power: Ensure the vacuum is turned off before plugging in.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the dust container: Ensure it is empty and properly installed.
Adjust height settings: Set the brush height according to your floor type.
Test suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Model: Eureka NEW400 Series.
Power: 120V AC, 60Hz.
Weight: 10 lbs.
Filtration: HEPA filter.
Attachments: Crevice tool, dusting brush, upholstery nozzle.
Capacity: 2 liters dust container.
Operating Radius: 25 feet.

Controls and Settings

Access controls on the handle for power and suction adjustment. Front panel includes a dust container release button.

Power Button: Turns the vacuum on and off.

Suction Control: Adjusts the suction power based on the surface being cleaned.

Connecting Accessories

Use the included attachments for various cleaning tasks.

Turn off the vacuum before changing attachments.
Align the attachment with the hose and push until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

Follow these steps for effective cleaning.

Power on the vacuum and select the desired suction level.
Move the vacuum back and forth slowly for optimal dirt pickup.
Empty the dust container when full for continued performance.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter monthly; replace if damaged.
Empty the dust container after each use.
Check for blockages in the hose and attachments.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power connection	Check if plugged in and outlet is functional.
Loss of suction	Clogged filter/container	Empty dust container and clean filter.
Noisy operation	Blockage or damaged part	Inspect for blockages and check for damage.
Attachments not working	Improper connection	Ensure attachments are securely connected.

Reset: Unplug for 10 seconds and plug back in.