Eureka 5700 Series Vacuum Cleaner Manual

The Eureka 5700 Series Vacuum Cleaner is designed for powerful cleaning performance with a lightweight design. It features a multi-cyclonic filtration system, a variety of attachments for different surfaces, and an easy-to-empty dust cup. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic filtration, lightweight design, various attachments, easy-to-empty dust cup.

Feature	Description
Multi-Cyclonic Filtration	Ensures powerful suction and reduces maintenance.
Lightweight Design	Easy to carry and maneuver around the house.
Dust Cup	Easy to empty and clean, no bags required.
Attachments	Includes crevice tool, upholstery nozzle, and dusting brush.
HEPA Filter	Traps allergens and dust for cleaner air.

Installation

Unpack and inspect contents. Assemble the vacuum cleaner as per the instructions.

Attach the handle to the main body until it clicks into place.
Connect the hose to the vacuum body.
Attach the desired cleaning tool to the hose.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; familiarize yourself with the controls.

Adjust the height setting for different floor types.
Check the dust cup and filter for proper installation.
Test the vacuum on a small area to ensure functionality.

CAUTION! Ensure the vacuum is off when changing attachments.

Specifications

Model: Eureka 5700 Series.
Power: 12 Amps.
Filtration: Multi-cyclonic and HEPA filter.
Weight: 10 lbs.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery nozzle, dusting brush.
Dust Capacity: 2 liters.

Controls and Settings

Access controls on the handle: Power switch, height adjustment dial.

Attachments: Easily switch between tools for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is powered off before connecting or disconnecting accessories.

Align the attachment with the hose and push until it clicks.
To remove, press the release button and pull off the attachment.

Tip: Use the appropriate attachment for the surface being cleaned.

Operating the Vacuum

Follow these steps for effective cleaning:

Turn on the vacuum using the power switch.
Adjust the height setting based on the floor type.
Move the vacuum back and forth slowly for optimal suction.
Empty the dust cup when full.

WARNING! Do not operate without the dust cup and filter in place.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the dust cup after each use.
Check and replace the HEPA filter as needed.
Inspect the hose for blockages and clean if necessary.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.eureka.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord unplugged	Check the power connection.
Poor suction	Full dust cup	Empty the dust cup.
Strange noise	Blockage in hose	Inspect and clear any blockages.
Attachments not working	Improper connection	Ensure attachments are securely connected.

Reset: If issues persist, refer to the customer service contact.